Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

The controller object is the physical fibre channel interface port on the server that operate as FC targets. It is identified by the name fc0 ... fc<n>

on FC only server and on both FC & iSCSI server it starts from fc1. For iSCSI operation it is referred by the generic name `iscsi' to represent all the physical ethernet interfaces.


show controller


mayacli show controller


mayacli show controller
iSCSI on eth0:
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1460
 inet netmask broadcast
 inet6 fe80::4001:aff:fe8a:7 prefixlen 64 scopeid 0x20<link>
 ether 42:01:0a:8a:00:07 txqueuelen 1000 (Ethernet)
 RX packets 289717 bytes 21139698 (20.1 MiB)
 RX errors 0 dropped 0 overruns 0 frame 0
 TX packets 620012 bytes 10843781269 (10.0 GiB)
 TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  • No labels