The controller object is the physical fibre channel interface port on the server that operate as FC targets. It is identified by the name fc0 ... fc<n>
on FC only server and on both FC & iSCSI server it starts from fc1. For iSCSI operation it is referred by the generic name `iscsi' to represent all the physical ethernet interfaces.
Usage
show controller
Examples
mayacli show controller
Output
mayacli show controller iSCSI on eth0: eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1460 inet 10.138.0.7 netmask 255.255.255.255 broadcast 10.138.0.7 inet6 fe80::4001:aff:fe8a:7 prefixlen 64 scopeid 0x20<link> ether 42:01:0a:8a:00:07 txqueuelen 1000 (Ethernet) RX packets 289717 bytes 21139698 (20.1 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 620012 bytes 10843781269 (10.0 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0